UCSF Clinical Laboratories Test Directory

Ordering

Ordering Recommendations

Follow the link for information about Blood Gas Panels that contain this test.

Available Stat

Yes

Performing Lab

Parnassus, Mission Bay and Mt Zion Chemistry

Performed

Test available 24 hours per day 7 days per week

Methodology

Potentiometry: Radiometer ABL 90 FLEX Plus

Reported

Stat 15 min, Routine 30 min

Additional Information

A level < 110 mmol/L or > 170 mmol/L will automatically be re-assayed.

High levels of glucose can lower electrolyte concentrations, each 100 mg/dL causing an apparent decrease in serum sodium of 1.6 mmol/L Ref: Schrier RW: Manual of Nephrology, Boston, Little Brown, 1981

Synonyms

Na
Electrolytes
Na+
Sodium
ARTBGL
VENBGL
CVBGL
MVBGL
CAPBG
MVBGCX
CIRBGA
CIRBGV
BLYTEG
NLYTE
Blood gas
ABG

Collection

Sample Type

Heparinized whole blood (Blood gas syringe only)

Collect

Plastic blood gas syringe containing approximately 70 IU dry heparin in a 3 mL syringe or 23 IU in a 1 mL syringe - or a capillary tube coated with 70 IU heparin (Radiometer Clinitube).

Amount to Collect

3 mL blood

Preferred Volume

3 mL blood

Minimum Volume

1 mL blood

Remarks

Arterial puncture:
Due to the risk of arterial damage and subsequent distal ischemia, prior to puncturing an artery the RN assesses the collateral circulation. If the radial artery is to be punctured, then the pulse of the ulnar artery is assessed. If the dorsalis pedis artery is to be accessed then the posterial tibial pulse is assessed and likewise if the posterial tibial approach is used the dorsalis pedis pulse is assessed. The modified Allens's test may be used to assess collateral circulation of the ulnar artery before a radial artery puncture, but it does not always ensure adequate flow. A Doppler ultrasound flow indicator may be used to verify collateral circulation. If the collateral circulation is poor and the RN cannot palpate a pulse then the physician should be notified before proceeding. If for any reason the circulation is compromised to the extremity being assessed for arterial puncture then the physician should be notified prior to proceeding.

1. Palpate the radial artery and identify the site where the pulse is the strongest. Avoid areas with overlying veins to prevent venous admixture.
2. Prepare the patient's skin with an alcohol or 2% chlorhexidine wipe/swab.
3. Place two or three fingers along the course of the artery both to locate its position and direction, and to stabilize it.
4. Penetrate the skin smoothly holding the needle at 30-60 degree angle with the needle bevel up and pointed proximally. The angle of the “butterfly" IV catheter should not exceed 45° for pediatric patients.
5. Re-establish the position and direction of the artery by palpation.
6. Gently and slowly advance the needle or “butterfly", aiming directly for the area of maximum pulsation.
7. When the arterial lumen has been entered, less resistance is felt and blood appears in the syringe above the needle hub.
8. Obtain required amount of arterial blood for test(s).
9. If blood is not obtained on first attempt, withdraw the needle to just below the skin surface and advance needle at same angle but at 1 mm to either side of previous attempt.
10. Place the 2x2 gauze over the site of the puncture then withdraw the needle from the artery. Press firmly at the site for at least five minutes, or until the bleeding stops. Apply bandage or pressure dressing.
11. Expel any air bubble in the syringe with air filter cap placed on specimen syringe.
12. Label sample with patient's name, ID number and DOB.

Venous samples:
1. Avoid excessive venous stasis from prolonged tourniquet application or clenching of the fist prior to sample collection.
2. For central line draws make sure to waste a full red top tube then draw via the blood gas syringe as noted above.
3. Fill syringe completely, remove needle (in peripheral draws), cap sample, expel all bubbles (while holding syringe upright) until blood hits the top of cap.
4. Label sample with patient's name, ID number and DOB.

Capillary Samples:
1. The following are recommended sampling sites: earlobe, fingertip, big toe, heel. The heel and big toe are more suitable for use on neonates and infants.
2. Warm the area or puncture site for 5 to 10 minutes prior to actual sampling. This accelerates flow for blood to be representative of general status of patient.
3. Make a puncture using a lancet or similar device. Do not squeeze the area to avoid tissue juice from mixing into blood sample.
4. Wipe off the first drop of blood. Take the sample from the center of the second drop of blood and hold the capillary at a slightly downward angle for an uninterrupted blood flow. Avoid getting air bubbles in the specimen.
5. Refrain from squeezing or milking the puncture site as this may result in faulty measurements or cause hemolysis of blood sample and cause elevated K+ readings.
6. Apply accompanying caps to both ends of the capillary tube and mix the sample with the heparin immediately after collection to prevent blood from clotting. The manufacturer recommends the use of a mixing wire and magnet for capillary samples.
7. Label sample with patient's name, ID and DOB.

Deliver samples immediately to lab for testing. Samples delivered to the lab >30 minutes after collection may yield erroneous results.

Unacceptable Conditions

Samples with needle attached, containing large bubbles, unlabeled, clotted or of insufficient volume

Processing

Test Code

NAWB: Parnassus and Mission Bay
NAWBG: Mt Zion

LAB4454: Arterial source

LAB4455: Venous source

LAB4456: Central venous source

LAB4457: Mixed venous source

LAB4459: Capillary source

Test Group

Sodium

Performing Lab

Parnassus, Mission Bay and Mt Zion Chemistry

Preferred Volume

3 mL blood

Minimum Volume

1 mL blood

Unacceptable Conditions

Samples with needle attached, containing large bubbles, unlabeled, clotted or of insufficient volume

Result Interpretation

Units

mmol/L

Reference Interval

Arterial:

136 – 146 mmol/L

Arterial reference range adopted from the UCSF reference range previously used with the ABL 835 blood gas analyzers.

Venous:

136-146 mmol/L

Venous reference range adopted from Ress KL et al, Pathology 2018, volume 50, supplement page S94 and verified by running 25 male and 25 female normal volunteers from UCSF Clinical Laboratories

Mixed venous, central venous and capillary:

136-146 mmol/L

Critical Values

< 125 mmol/L or > 155 mmol/L

Additional Information

A level < 110 mmol/L or > 170 mmol/L will automatically be re-assayed.

High levels of glucose can lower electrolyte concentrations, each 100 mg/dL causing an apparent decrease in serum sodium of 1.6 mmol/L Ref: Schrier RW: Manual of Nephrology, Boston, Little Brown, 1981

Administrative

CPT Codes

84295

LOINC Codes

2947-0

Complete View

Available Stat

Yes

Ordering Recommendations

Follow the link for information about Blood Gas Panels that contain this test.

Test Code

NAWB: Parnassus and Mission Bay
NAWBG: Mt Zion

LAB4454: Arterial source

LAB4455: Venous source

LAB4456: Central venous source

LAB4457: Mixed venous source

LAB4459: Capillary source

Test Group

Sodium

Performing Lab

Parnassus, Mission Bay and Mt Zion Chemistry

Performed

Test available 24 hours per day 7 days per week

Methodology

Potentiometry: Radiometer ABL 90 FLEX Plus

Remarks

Arterial puncture:
Due to the risk of arterial damage and subsequent distal ischemia, prior to puncturing an artery the RN assesses the collateral circulation. If the radial artery is to be punctured, then the pulse of the ulnar artery is assessed. If the dorsalis pedis artery is to be accessed then the posterial tibial pulse is assessed and likewise if the posterial tibial approach is used the dorsalis pedis pulse is assessed. The modified Allens's test may be used to assess collateral circulation of the ulnar artery before a radial artery puncture, but it does not always ensure adequate flow. A Doppler ultrasound flow indicator may be used to verify collateral circulation. If the collateral circulation is poor and the RN cannot palpate a pulse then the physician should be notified before proceeding. If for any reason the circulation is compromised to the extremity being assessed for arterial puncture then the physician should be notified prior to proceeding.

1. Palpate the radial artery and identify the site where the pulse is the strongest. Avoid areas with overlying veins to prevent venous admixture.
2. Prepare the patient's skin with an alcohol or 2% chlorhexidine wipe/swab.
3. Place two or three fingers along the course of the artery both to locate its position and direction, and to stabilize it.
4. Penetrate the skin smoothly holding the needle at 30-60 degree angle with the needle bevel up and pointed proximally. The angle of the “butterfly" IV catheter should not exceed 45° for pediatric patients.
5. Re-establish the position and direction of the artery by palpation.
6. Gently and slowly advance the needle or “butterfly", aiming directly for the area of maximum pulsation.
7. When the arterial lumen has been entered, less resistance is felt and blood appears in the syringe above the needle hub.
8. Obtain required amount of arterial blood for test(s).
9. If blood is not obtained on first attempt, withdraw the needle to just below the skin surface and advance needle at same angle but at 1 mm to either side of previous attempt.
10. Place the 2x2 gauze over the site of the puncture then withdraw the needle from the artery. Press firmly at the site for at least five minutes, or until the bleeding stops. Apply bandage or pressure dressing.
11. Expel any air bubble in the syringe with air filter cap placed on specimen syringe.
12. Label sample with patient's name, ID number and DOB.

Venous samples:
1. Avoid excessive venous stasis from prolonged tourniquet application or clenching of the fist prior to sample collection.
2. For central line draws make sure to waste a full red top tube then draw via the blood gas syringe as noted above.
3. Fill syringe completely, remove needle (in peripheral draws), cap sample, expel all bubbles (while holding syringe upright) until blood hits the top of cap.
4. Label sample with patient's name, ID number and DOB.

Capillary Samples:
1. The following are recommended sampling sites: earlobe, fingertip, big toe, heel. The heel and big toe are more suitable for use on neonates and infants.
2. Warm the area or puncture site for 5 to 10 minutes prior to actual sampling. This accelerates flow for blood to be representative of general status of patient.
3. Make a puncture using a lancet or similar device. Do not squeeze the area to avoid tissue juice from mixing into blood sample.
4. Wipe off the first drop of blood. Take the sample from the center of the second drop of blood and hold the capillary at a slightly downward angle for an uninterrupted blood flow. Avoid getting air bubbles in the specimen.
5. Refrain from squeezing or milking the puncture site as this may result in faulty measurements or cause hemolysis of blood sample and cause elevated K+ readings.
6. Apply accompanying caps to both ends of the capillary tube and mix the sample with the heparin immediately after collection to prevent blood from clotting. The manufacturer recommends the use of a mixing wire and magnet for capillary samples.
7. Label sample with patient's name, ID and DOB.

Deliver samples immediately to lab for testing. Samples delivered to the lab >30 minutes after collection may yield erroneous results.

Collect

Plastic blood gas syringe containing approximately 70 IU dry heparin in a 3 mL syringe or 23 IU in a 1 mL syringe - or a capillary tube coated with 70 IU heparin (Radiometer Clinitube).

Amount to Collect

3 mL blood

Sample Type

Heparinized whole blood (Blood gas syringe only)

Preferred Volume

3 mL blood

Minimum Volume

1 mL blood

Unacceptable Conditions

Samples with needle attached, containing large bubbles, unlabeled, clotted or of insufficient volume

Units

mmol/L

Reference Interval

Arterial:

136 – 146 mmol/L

Arterial reference range adopted from the UCSF reference range previously used with the ABL 835 blood gas analyzers.

Venous:

136-146 mmol/L

Venous reference range adopted from Ress KL et al, Pathology 2018, volume 50, supplement page S94 and verified by running 25 male and 25 female normal volunteers from UCSF Clinical Laboratories

Mixed venous, central venous and capillary:

136-146 mmol/L

Critical Values

< 125 mmol/L or > 155 mmol/L

Synonyms

Na
Electrolytes
Na+
Sodium
ARTBGL
VENBGL
CVBGL
MVBGL
CAPBG
MVBGCX
CIRBGA
CIRBGV
BLYTEG
NLYTE
Blood gas
ABG

Reported

Stat 15 min, Routine 30 min

Additional Information

A level < 110 mmol/L or > 170 mmol/L will automatically be re-assayed.

High levels of glucose can lower electrolyte concentrations, each 100 mg/dL causing an apparent decrease in serum sodium of 1.6 mmol/L Ref: Schrier RW: Manual of Nephrology, Boston, Little Brown, 1981

CPT Codes

84295

LOINC Codes

2947-0